|
|
WASHING MACHINE FOR TROLLEYS AND HOLDRES FOR JAMÓN AND PROSHUTO, 21.5110.01
|
|
The machine is designed for washing of trolleys with dimensions 2950х1200 mm and holders with dimensions 3700х1200х1200 mm, which are used in the production for jamón ham. Both products rotate in rotating frame in the machine chamber. The transport system for the hanging trolleys is connected to the machine, so that they automatically enter in the rotating frame. The holders, which are not hanging, are placed in the machine with the help of pallet truck and platform. After that depending on the washing product – with or without jamón, the operator chooses the desired washing program. Before starting the washing process the trolley is steamed to soften the contamination and to ensure the washing quality. The washing is done with circulating water from tank through two nozzle collectors and for the rinsing is used general water supply. The water used for the washing and rinsing is led though filter for catching the bigger soils in the washing tank to be used again. Washing solution is heated by injector for direct steam. The machine is equipped with ventilation system for steam exhaust and dosing pump for detergent.The machine is made of stainless steel 1.4301 (AISI 304) and complies with the Council Directives 2006/42/ЕС and 2006/95/EC, and USDA regulations. |
|
|
Technical data:
|
| Capacity jamón trolleys |
30 pcs./h |
Holders
|
20 pcs./h |
| Power supply |
400 V/3 Ph/50 Hz
|
| Control voltage |
24 V DC
|
| Installed power |
12 kW |
|
| Heating |
3 bar, 130°C |
| Pump |
11 kW/45 m³/h/6,5 bar |
| Compressed air |
5-6 bar |
| Water inlet |
min. 3 bar
|
| Water outlet |
DN50
|
|
|
Dimensions:
|
| Length of the machine |
2100 mm |
| Length with door open |
4300 mm |
Width
|
3470 mm |
| Width with door open |
3700 mm |
| Height above floor |
4550 mm |
| Total height |
5090 mm |
|
|
