The machine is pass-through tunnel machine and is designed to clean standard E1-E3 plastic crates and glass storage crates. It consists of washing and rinsing zone and blow-off.

The washing is performed by means of centrifugal pump and adjustable (by hand) nozzles. The washing agent is added manually in the tank before starting the machine (option – automatic dosing system). The tank is equipped with manually cleaned filter for catching the bigger soils. The water for washing can be heated by means of electric heaters. The desired water temperature can be adjusted between 30-60°C via thermostat. For the rinsing is used general water supply. After the rinsing this water is used also for refreshing and additional filling of the washing tank. When washing glass crates rinsing agent can be added in the rinsing water.

In the last zone high pressure blowers and air knives blow off the water from all sides of the crates.

When washing standard crates it is used the turning mechanism by single operator. The crates are placed on transport rollers with their bottom down over the machine. By pushing they are transported to the turning mechanism from where they enter in the washing zone. The further transport is done by motor driven transport chain. For washing glass crates the turning mechanism should be lifted up and two persons are working with it – one at the entrance and one at the exit of the machine.

The transport speed is smoothly adjustable. The gear motor is equipped with sliding connector to prevent eventual injuries to the personnel.

The electrical panel is mounted on the right side of the machine (it can be also on the left side – 2000610236) and the side covers are euqipped with safety switches (option).

The machine is made of stainless steel 1.4301 (AISI 304) and complies with the Council Directives 2006/42/ЕС and 2006/95/EC, and USDA regulations.