|
|
|
Washing Machine for Lid Containers with Blow-off Zone 20.0007.0210
|
|
|
The machine is left execution, tunnel and is designed to clean lid containers with dimensions 600x320x320 mm (width with open lid 760 mm); folding crates 600х400х250 mm and standard crates 600х400х200-350 mm. It consists of zones for washing and rinsing and blowing-off.
The washing is performed by means of centrifugal pump and adjustable (by hand) nozzles. The washing agent is added manually in the tank before starting the machine (option – automatic dosing system). The tank is equipped with manually cleaned filter for catching the bigger soils. The water for washing can be heated by means of electric heaters or a injector for direct steam. The desired water temperature can be adjusted between 30-60°C via thermostat. For the rinsing is used general water supply. After the rinsing this water is used also for refreshing and additional filling of the washing tank.
In the last zone high pressure blowers and air knives blow off the water from all sides of the crates.
|
|
|
|
The crates are placed with open lid and are transported through the zones by a motor driven chain (transport speed is smoothly adjustable). The gear motor is equipped with sliding connector to prevent eventual injuries to the personnel.
The machine is made of stainless steel 1.4301 (AISI 304) and complies with the Council Directives 2006/42/ЕС and 2006/95/EC, and USDA regulations. |
|
Тechnical data:
|
| Max. capacity |
240 crates/hour
|
| Dimensions of the product |
lid containers 600х320/760х320 mm
folding crates 600х400х250 mm
crates 600х400х200-350 mm |
| Power supply |
400V/3Ph/50Hz |
Control voltage
|
24 V DC |
| Installed power |
35 kW |
| Heating |
2x11 kW
|
| Drive |
0,25 kW
|
| Pump |
4 kW/33 m³/h/3 bar |
| Adjustable washing nozzles |
38 pcs.
|
| Tank volume |
320 l |
| Water inlet |
min 3 bar |
| Water outlet |
Ø50 |
 |
| Dimensions: |
| Length |
5400 mm |
Width
|
1520 mm |
| Height |
1750 mm |
|
|
