The machine is pass-through tunnel machine and is designed for washing of crates with aluminum parts inside. It is special execution according to customer’s requirements.

The machine consists of three zones, each equipped with tank and centrifugal pump, which supplies the nozzles in the tunnel. On the exits of all pumps are built in valves for adjusting the flow. All three tanks have electrical heaters, filters (manual cleaning) and side openings for easy cleaning of the tanks.

The first zone is used for washing and the washing agent is dosed from dosing pump. The second zone is used for rinsing with circulating warm water. The third zone is used again for rinsing, but with possibility to be used circulating warm water or cold water from the supply network. The used water can be directed to the tanks for refreshing the washing solution or direct to the discharge pipe. The water in the tanks can flow through the different zones through overflows and pipe connections, but when necessary it can be stopped with valve.

The products are transported through the zones by a motor driven chain (transport speed is smoothly adjustable). The gear motor is equipped with sliding connector to prevent eventual injuries to the personnel.

According client’s whishes on the entrance and exit of the machine are mounted roller conveyors without drive and above them are the ventilating systems (they are offered as an option). The control panel is positioned on the left side of the machine (can be offered also right execution 2006602253) and the power switchboard is separated from the machine on feet.

After washing and rinsing 4 pcs. crates are pushed in the module for drying, where they are blown off with hot air, supplied from fans and heated from heating blocks. The modul is fully autonomous and is offered separately from the machine.

The machine is made of stainless steel 1.4301 (AISI 304) and complies with the Council Directives 2006/42/ЕС and 2006/95/EC, and USDA regulations.