|
|
|
Pass-Through Boot Cleaning Machine 12.2025.60
|
|
|
The machine is pass-through machine, special development for the mining industry, where the brushes form and length allow cleaning of heavily contaminated boots.
The machine consists of six brushes, each one driven by gear motor, body with stairs and rails, injecting system of cleaning solution, automatic dosing injector for cleaning agent and a control unit. The brush rotation starts after activation of the photocells, which are positioned at the entrance and the exit of the machine.
The machine is made of stainless steel 1.4301 DIN (AISI 304) and complies with Council Directives No. 2006/42/EC and 2006/95/EC and USDA Regulations.
|
| Technical data: |
| Power supply |
230 V/50 Hz |
| Control voltage |
24 V DC |
| Installed power |
3,2 kW |
| Water inlet |
min 2 bar |
| Water outlet |
ø108 mm |
|
|
| Dimensions: |
| Length of body (without steps) |
3600 mm |
| Total length |
4226 mm |
| Length of the brushes for sole cleaning |
2х2500 mm |
| Length of the brushes for boot cleaning |
4х2500 mm |
| Width |
1150 mm |
| Height |
1120 mm |
|
|
